LuminaPlot brings the whole workflow into one fast, browser-based tool — from the first truss to the paperwork the crew tapes to the wall. No install, no licence dongle, no CAD degree.
Hundreds of fixtures from Robe, Martin, Chauvet, Astera, GLP and Ayrton — each with modes, DMX footprint, weight and power. Add your own and save inventories to reuse across plots.
Drag single bars, tri-truss or box truss anywhere on the plot, at any angle. Set trim heights and per-position max loads, with live over-weight warnings as you hang.
Auto-assign FID, DMX address and universe in one click. Map Art-Net (net/subnet/universe) and sACN (E1.31) for console-ready patch sheets.
Track circuits and dimmers, balance load across phases, size connectors and cable, and catch conflicts before the truck is loaded. A full power report ships in the pack.
Plot drawing with title block and legend, instrument schedule, magic sheet, hookup, patch, power and truss build sheet — to PDF and CSV.
Branding on ProExport .mvr for MA3, Capture, WYSIWYG and Vectorworks, or .dxf with per-department layers for any CAD — the plot you draw is the rig you visualise.
Invite your team by email, see live presence, and pin comments right on a fixture or truss — resolve them as notes get handled. Share view or edit links; roles keep everyone in their lane.
Flip the editor to the audio department: hang PA, drop subs, wedges and IEMs from a real speaker library (L-Acoustics, d&b, Meyer Sound, RCF or custom), build the input list and monitor mixes, and print the audio pack — input list, patch, monitor sheet and speaker schedule.
New in 2.0House tabs, travelers, legs, borders, cyc and scrims live on the plot — with material, trim, track and fire rating — shown open, closed or partial, and printed on their own soft-goods schedule.
New in 2.0Name every part of the room — audience zones with capacity, B-stages, FOH, backstage, bar, dressing — in a dedicated Zones mode, and pin fixed house features (power points, tie-lines, network/DMX, FOH riser) that every plot in that venue inherits automatically.
New in 2.0Companies get shared inventories, availability and conflict checks, pull sheets, and productions that group plots, crew and dates.
CompanySave any plot as a template, duplicate it onto a saved venue in one step, and group dates into a tour — the same rig, re-drawn for every room it plays.
New in 2.0Send your patch straight to the desk — ETC Eos, grandMA3 and ChamSys MagicQ formats plus USITT ASCII, alongside MVR for your visualiser.
New in 2.0Drop the venue's ground plan (image or CAD DXF) behind your plot, scaled to real metres — and save whole rooms as venue profiles your company shares. Works in metres or feet & inches.
New in 2.0Design on desktop, then open a plot on your phone for a read-only companion with hookup, patch and counts on the show floor.
Lay out the room on a live canvas — drag bars, trusses and audience areas into place (or grab a rig preset), set trim heights and max loads, then hang fixtures from the library with live weight checks.
Auto-patch DMX, map Art-Net/sACN, assign circuits and balance phases — conflicts flagged as you go.
Export the plot, schedules and reports to PDF/CSV, push .mvr to your visualiser, and invite the team.
Free to start, no install. New to the craft? The Learn hub has interactive tutorials — including a 3D moving-head simulator.